Dan Scott Dan Scott's Profile Page

Dan Scott Dan Scott

About me

PDD復習過去問 & PDD専門知識訓練

Jpexam1年以内にPDD試験問題の更新を無料で提供し、購入者が1年後にサービス保証を延長したい場合は50％の割引特典を提供します。古いクライアントは、他の試験教材を購入する際に、ある程度の割引を受けています。 PDDガイドトレントを頻繁に更新し、理論と実践の最新動向を反映した最新の学習資料を提供します。したがって、PDDテストガイドを十分にマスターし、試験に合格することができます。メリットを享受しながら、試験に合格することができます。お気軽にPDDガイド急流を購入してください！

NCARB PDD 認定試験の出題範囲：

トピック
出題範囲

トピック 1

Project Manual & Specifications: This section of the exam measures the skills of Specifications Writers and emphasizes the importance of developing documentation that goes beyond drawings. Candidates must understand how to identify and prioritize elements needed to prepare, maintain, and refine both the project manual and project specifications. It also assesses the ability to align and coordinate these specifications with the construction documents to ensure consistency and accuracy.

トピック 2

Integration of Building Materials & Systems: This section of the exam measures the skills of Architectural Designers and focuses on the ability to resolve and integrate various building systems into cohesive project goals. It covers analyzing architectural systems and technologies, determining the size of structural, mechanical, electrical, and plumbing systems, and incorporating specialty systems such as acoustics, lighting, security, and communications. It also evaluates the ability to detail how multiple building systems work together and to coordinate across disciplines to achieve a unified design.

トピック 3

Construction Documentation: This section of the exam measures skills of Project Architects and addresses the creation and management of project documentation. Candidates are expected to demonstrate knowledge of documenting building design and site features, preparing detailed architectural drawings, and applying industry standards to produce a coordinated set of construction documents. The section also includes understanding how project changes impact documentation and how to communicate these updates effectively to both the design team and the client.:

トピック 4

Construction Cost: This section of the exam measures the skills of Construction Managers and focuses on the financial side of project execution. It evaluates the ability to analyze construction cost estimates to confirm that they align with project design intent and budgetary constraints. Although this is the smallest section, it is critical for ensuring projects remain feasible and economically viable.

トピック 5

Codes & Regulations: This section of the exam measures skills of Building Code Specialists and examines how codes and regulations apply at a detailed level during documentation. Candidates are expected to demonstrate knowledge of compliance with the International Building Code (IBC) as well as other specialty regulations, as well as how to interpret and apply these standards to ensure design and documentation meet legal and safety requirements.

>> PDD復習過去問 <<

PDD専門知識訓練 & PDD日本語認定対策

スペシャリストは、PDDの実際の試験の内容が毎日更新されるかどうかを確認します。新しいバージョンがある場合は、ユーザーが最新のリソースを初めて利用できるように、それらが時間内にユーザーに送信されます。このようにして、当社のPDDガイド資料は、ユーザーのニーズを考慮に入れた非常に高速な更新レートを持つことができます。 PDD学習資料を使用するユーザーは、新しいリソースと接触する最初のグループである必要があります。 PDD練習問題から更新リマインダーを受け取ったら、時間内にバージョンを更新でき、重要なメッセージを見逃すことはありません。

NCARB ARE 5.0 Project Development and Documentation Exam 認定 PDD 試験問題 (Q14-Q19):

質問 # 14
Which of the following siding types should only be applied vertically?

A. Plain bevel
B. V-shiplap
C. V-groove tongue and groove
D. Board and batten

正解：D

解説：
Board#and#batten is a vertical siding system: wide vertical boards with narrow battens covering the joints; its detailing, drainage, and expansion behavior are intended for vertical application only.
By contrast, plain bevel (lap) siding is typically horizontal; V#shiplap and V#groove T&G can be detailed either direction depending on manufacturer, but are commonly horizontal on walls.
PDD References: Exterior wall cladding and detailing under "Materials & Assemblies-Exterior enclosure," CSI Div. 06 & 07 application details.

質問 # 15

Refer to the exhibit.
In the diagram shown, what is the purpose of the pressure relief valve?

A. Relive negative pressure when draining the tank
B. Allow for thermal expansion of water
C. Regulate water pressure fluctuation
D. Vent the tank of accumulated air

正解：B

解説：
Understanding the Diagram
The diagram shows a water heater (WH) with labeled connections and valves.
Item 2 is the ASME pressure relief valve, piped to 6 inches above the finished floor.
Purpose of the Pressure Relief Valve in a Water Heater
* When water is heated, it expands.
* In a closed plumbing system, this expansion increases pressure inside the water heater tank.
* If the pressure rises above a safe limit, it can damage the heater, piping, or even cause an explosion.
* The temperature and pressure relief valve (T&P valve) automatically opens to discharge water when pressure or temperature exceeds safe limits, relieving the pressure caused by thermal expansion.
Why Other Options Are Incorrect:
* A. Regulate water pressure fluctuation - Pressure regulation is done by a pressure-reducing valve, not a relief valve.
* B. Vent the tank of accumulated air - Air elimination is done with air vents or bleeders, not the T&P valve.
* D. Relieve negative pressure when draining the tank - Negative pressure prevention uses vacuum relief valves, not T&P valves.
NCARB ARE 5.0 PDD Study Guide References:
* Content Area: Plumbing Systems - Equipment and Safety Components
* Source References:
* Plumbing Engineering Design Handbook - Water Heater Safety Devices
* Architectural Graphic Standards - Water Heater Installation Details
* MEEB (Mechanical and Electrical Equipment for Buildings) - Plumbing Chapter: Safety valves in hot water systems
* Code Reference:
* International Plumbing Code (IPC) Section 504.6 - T&P relief valve requirements for water heaters Key Point:
The ASME-rated relief valve's main role is to protect the water heater and piping by relieving excessive pressure due to water expansion from heating.

質問 # 16
Before construction documents are complete, the owner requests a review of the timeline allowed for ASIs, RFIs, RFPs, and change orders as defined in the project manual.
Which section of the project manual is relevant to this request?

A. Section 01 26 00 Contract Modification Procedures
B. AIA Document A201
C. Supplementary Conditions
D. Section 01 35 16 Alteration Project Procedures

正解：A

解説：
The owner's request for review of ASIs (Architect's Supplemental Instructions), RFIs (Requests for Information), RFPs (Requests for Proposals), and change orders relates to contract modifications.
Section 01 26 00 in the project manual typically covers Contract Modification Procedures, including timelines and processes for handling these changes.
AIA Document A201 is the general conditions but does not detail specific timelines.
Supplementary Conditions modify A201 but usually don't detail these timelines.
Section 01 35 16 is specific to alteration projects, not general contract mod procedures.
Reference:
NCARB ARE 5.0 Review Manual, Project Management chapter
CSI MasterFormat and project manual organization guides

質問 # 17

Refer to the exhibit.
The exterior cast-in-place concrete wall of a heated building is insulated with polyurethane slabs.
The concrete will be warmest in the winter if the insulation is applied as shown in which of the following?

A. D
B. A
C. C
D. B

正解：A

解説：
To keep the concrete warmest in winter, place the continuous insulation on the exterior so the concrete mass stays inside the thermal envelope and sees interior temperatures. This reduces heat loss, limits risk of interstitial condensation at the concrete surface, and improves thermal lag. Option D shows all polyurethane insulation on the outside of the wall; A and B place some or all insulation inside, and C splits it-both allow more winter heat loss from the concrete.
PDD references: Building envelope heat flow & thermal mass strategy; continuous insulation placement (ASHRAE Fundamentals; NCARB ARE 5.0 PDD-Envelope & Thermal/Moisture Protection, CSI Div 07).

質問 # 18
Which elevator type is the most appropriate choice for a 15-story high-rise residential condominium where speed and noise are considerations?

A. Gearless traction
B. Holed hydraulic
C. Hole-less hydraulic
D. Geared traction

正解：A

解説：
For a 15-story high-rise where speed and noise matter, gearless traction elevators are the standard choice:
highest speeds, smoother/quiet operation, and efficiency for taller buildings. Hydraulic (holed or hole-less) are limited to low-rise (#2-6 stories) and are slower/noisier; geared traction is mid-rise with lower speeds and more noise than gearless.
PDD references: Vertical transportation selection criteria-rise vs. technology; ARE 5.0 PDD "Building Systems-Elevators."

質問 # 19
......

当社NCARBのウェブサイトJpexamは非常に安全で定期的なプラットフォームです。第一に、PDD試験トレントの購入プロセス中に会社のウェブサイトのセキュリティを保証します。第二に、PDD模擬テストの購入に関するすべての顧客情報については、専門の担当者が管理し、情報開示は一切行われません。最後になりましたが、最も重要なのは、PDD試験の教材には、98％から100％の高い合格率に基づく高品質のメリットがあります。 ARE 5.0 Project Development and Documentation Examデータは他の言葉よりも雄弁です。 PDDトレーニング準備に自信を持ってください。

PDD専門知識訓練: https://www.jpexam.com/PDD_exam.html

0

Course Enrolled

0

Course Completed

Dan Scott Dan Scott

About me

0

0

Sign in